Owner manual

MS-1400 Keri Keys Receiver
Installation Guide
Page 3 of 7 P/N: 01501-001 Rev. C
3.0 Two Channel Operation Wiring
This receiver is designed to output data on two separate channels. This allows one receiver to control two entrances when
using the four button clicker.
NOTE: For Single Channel Operation, connect the Channel A output only.
3.1 One PXL-500P
Figure 2: MS-1400 Keri Keys Wiring - 1 PXL-500P
3.2 Two PXL-500Ps
NOTE: When connecting the receiver to two PXLs, connect the 12VDC from only one PXL-500P.
Figure 3: MS-1400 Keri Keys Wiring - 2 PXL-500Ps