Owner manual

MS-1400 Keri Keys Receiver
Installation Guide
Page 2 of 7 P/N: 01501-001 Rev. C
2.0 Specifications
Clicker Receiver Dimensions (Enclosure)
• 7.24 inches high by 3.75 inches wide (at the widest point) by 2.30 inches deep
• 18.39 cm high by 9.52 cm wide by 5.84 cm deep
Power/Current Requirements
• less than 100 mA (allows it to be powered from the PXL-500 the same as other MS series readers)
Operating Temperature/Humidity Range
•-20°F to 140°F (-29°C to 60°C)
• 0% to 90% Relative Humidity, non-condensing
Cable Requirements
One PXL:
• 4 conductor, shielded cable (such as Belden 9534) up to 500 feet from the host controller
2 PXLs:
• 3 conductor, shielded cable up to 500 feet from the first controller
• 2 conductor, shielded cable up to 500 feet from the second controller