Owner manual

Figure 51: Event Messages

Doors NetXtreme

Reference Manual Keri Systems, Inc.

Page 54 01945-100 Rev. 4.0

18.2 Setup Event Messages

Click on Setup > View Filters and Event Messages > Event Messages (tab).

1. Set the Priority.

2. The Message Te

xt string may be renamed to make it more descriptive to the operator, making

report and alert viewing easier to understand.

3. Select from the drop-down menu which controllers are to save the event (the default is for all

controllers to save all access, credential, controller, and input/output types of events).

4. Designate by clicking in the empty box (until it turns green with a black check) whether a sound

alert should be generated for each event. Alarm sounds will repeat until acknowledged by the

operator (default is for all sound alerts to be off).

NOTE: The sound alert played is the Windows Exclamation sound, which can be set in the Control

Panel

> Soun

ds window. If the server/client does not have a sound card, the PC’s speaker beeps. Sound

alert acknowledgement is done by clicking on the

button on the DoorsNXT tool bar.

5. Click to save the event messages as set up or to clear it without saving.