Owner manual

Keri Systems, Inc. Doors NetXtreme

Reference Manual

01945-100 Rev. 4.0 Page 43

12.0 IN / OUT Reader

There are three type of In/Out Reader:

• In only

•Out only

•In/Out

Figure 40: Enable In/Out Reader

12.1 Enable In/Out Reader

Click on Setup > Options and Preferences.

1. Select the “Setup User Options” tab.

2. Click in the box next to “In/Out Doors Enabled.”

3. If an 8 Bit Burst keypad is in use, the number of PIN digits to be used may be set as well. (The

range available is from 1-15 digits.)

4. Click on the “Apply All Changes” button.