Installation Guide User guide

Keri Systems, Inc.

01956-001 Rev. A

www.kerisys.com

Connecting to LAN (Ethernet – TCP/IP – Cont.)

LAN-50 Wiring Connections

DIP Switch Settings

SW1: Device ID

Device ID 0 is reserved for TCP/IP – LAN-50 devices. For LAN-50 operation,

set the BioPointe Device ID to 0 per the BioPointe Device ID Addressing

Table.

SW2: 4 mini-switches, [1,2] SW2: 4 mini-switches, [3,4]

Baud Rate Communication Type

SW3: 8 mini-switches

Interface Type S1 S2 S3 S4 S5 S6 S7 S8

RS232 * - - - ON - ON - ON

RS422 - ON ON - ON - ON -

RS485 ON - ON - ON - ON -

* Default Value

BioPointe Pin DB-25M Pin

Baud Rate (Bps) Switch 1 Switch 2

38400 * ON ON

19200 - ON

9600 - -

2400 ON -

* Default Value

Comm Type Switch 3 Switch 4

RS232 ON ON

Modem ON -

TCP/IP * - ON

RS422/485 - -

* Required Value for LAN-50