Instruction Manual

10
after the other, etc.
5 Replacing the spare nozzle (Fig. C)
5.1 Unscrew the burner using an 18 mm universal open-end wrench and remove it.
5.2 Hold the base of the burner with a 15 mm open-end wrench (ii) and unscrew the gas nozzle
with the O-seal using a 4 mm Allen key (iii).
5.3 Screw the new gas nozzle in and tighten it. Take care not to tighten it too much.
5.4 Reinsert the burner and secure it with the 18 mm universal open-end wrench and moderate
force to establish a tight connection.
6 Technical specifications
Length: 310 mm
Weight: 675 g
Heating time: 60 seconds
Working temperature: adjustable up to 450 °C
Service life: approx. 120 minutes
Gas: butane canister
FIG. C
FIG. D
(ii)
(iii)
Go here to the video