Safety data sheet

Date printed 20.04.2017, Revision 20.04.2017 Version 01 Page 2 / 9
KERAFOL Keramische Folien GmbH
Safety Data Sheet 1907/2006/EC - REACH (GB)
Keratherm®-Bond 100RT, Comp. A
92676 Eschenbach
SECTION 4: First aid measures
4.1 Description of first aid measures
General information Take off contaminated clothing and wash before reuse.
Inhalation Ensure supply of fresh air.
Skin contact When in contact with the skin, clean with soap and water.
Consult a doctor if skin irritation persists.
Eye contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Ingestion Do not induce vomiting.
Rinse out mouth and give plenty of water to drink.
Seek medical advice.
4.2 Most important symptoms and effects, both acute and delayed
None known.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Forward this sheet to the doctor.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media Alcohol-resistant foam.
Water mist.
Carbon dioxide.
Extinguishing media that must not
be used
Full water jet.
Dry powder.
5.2 Special hazards arising from the substance or mixture
risk of formation of toxic pyrolysis products, carbon monoxide (CO), not combusted
hydrocarbons
5.3 Advice for firefighters
Use self-contained breathing apparatus.
Cool containers at risk with water spray jet.
Fire residues and contaminated firefighting water must be disposed of in accordance within
the local regulations.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Keep away from all sources of ignition.
Wear suitable protective equipment. For personal protection see SECTION 8.
Some risk of slipping due to spillage of product.
6.2 Environmental precautions
Do not discharge into the drains/surface waters/groundwater.
6.3 Methods and material for containment and cleaning up
Take up mechanically.
Take up residues with absorbent material (e.g. sand, sawdust, general purpose binder,
diatomaceous earth).
Dispose of absorbed material in accordance within the regulations.
6.4 Reference to other sections
See SECTION 8+13
www.chemiebuero.de, Phone [phone], [e-mail], 160712 kaf00113 GB