Instruction Manual

BHK-MG (OPR) 022014 1-13/(1-14 Blank)
1.6 ACCESSORIES
Accessories for the BHK Power Supply are listed in Table 1-5.
1.7 SAFETY
There are no operator serviceable parts inside the case. Service must be referred to authorized
personnel. Using the power supply in a manner not specified by Kepco. Inc. may impair the pro-
tection provided by the power supply. Observe all safety precautions noted throughout this man-
ual. Table 1-6 lists symbols used on the power supply or in this manual where applicable.
TABLE 1-5. ACCESSORIES
ITEM FUNCTION
PART NUMBER
IEEE 488 (GPIB) Cable, 1m long Connect BHK-MG Power Supply to GPIB bus. SNC 488-1
IEEE 488 (GPIB) Cable, 2m long Connect BHK-MG Power Supply to GPIB bus. SNC 488-2
IEEE 488 (GPIB) Cable, 4m long Connect BHK-MG Power Supply to GPIB bus. SNC 488-4
Slide (2) Allows rack-mounted units to slide in and out. CS-01, -02, -03 (Kepco)
110-QD-14-2 (Jonathan)
External Trigger Port mating connector Allows access to external trigger function. 142-0527 (Kepco)
SP-2501 (CUI)
RS 232 Port Adapter Cable Kit Contains RJ 45 Patch cord, two RS 232 adapt-
ers (one with male pins to connect to DTE
equipment and one with female pins to connect
to a personal computer), and an RS 232 Loop
Back test Connector (to test RS 232 communi-
cation and aid in isolating RS 232 communica-
tion problems).
KIT 219-0436
Mating connector for A2J5 (Analog Read-
back and Flags)
Allow user access to analog readback and flag
signal; see Table 1-3 for details.
143-0359
TABLE 1-6. SAFETY SYMBOLS
SYMBOL MEANING
CAUTION: RISK OF ELECTRIC SHOCK.
CAUTION: REFER TO REFERENCED PROCEDURE.
WARNING INDICATES THE POSSIBILITY OF BODILY INJURY OR DEATH.
CAUTION INDICATES THE POSSIBILITY OF EQUIPMENT DAMAGE.
!