Owner's Manual

9
BLUETOOTH®
Depending on the operating system and the firmware version of your
mobile phone, Bluetooth features may not work with this unit.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Secure using cord
clamps (not supplied)
if necessary.
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KDC-X3 ”/“KDC-BT3 ”/
“KDC-BT3
/BT2 ”/“KDC-MP3 ”/“KMR-D3 ”) on the Bluetooth device.
“PAIRING”
“PASS XXXXXX” “Device name” “PRESS” “VOLUME
KNOB” appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
•
/ / / : “BT1” and/or “BT2”
indicator on the faceplate lights up.
•
/ / / : “BT1” and/or
“BT2” on the display window lights up.
Answer a call
Press or the volume knob or one of the number buttons (1 to 6).
• To adjust the phone volume
[00] to [35] , turn the volume knob.
• To end a call, press
.
Audio player via Bluetooth
1 Press B SRC repeatedly to select BTAUDIO.
• Pressing
enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause
Press 6 IW.
Select group or folder Press 2
/ 1 .
Reverse skip/Forward skip Press
.
Reverse/Fast-forward Press and hold
.
Repeat play Press 4
repeatedly.
Random play Press and hold 3
to select [ALL RANDOM] .
JS_KWD_QSG_KDC_X303_KN_EN_3rd draft.indd 9 23/5/2018 2:54:14 PM