MONITOR WITH DVD RECEIVER KVT-817DVD INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Before Use .................................................... 4 Notes on playing MP3/WMA/JPEG/MPEG.. 6 Opening/Closing the Monitor and Power Switch ............................................ 8 Removing/Attaching the Protection Panel .. 9 KVT-817DVD Basic operations ................. 10 Basic Operations of Remote Controller ... 12 About discs ................................................. 15 Switching Small Display ............................ 16 Switching Screen Mode .......................
Source Select.............................................. 60 Displaying the Control screen Displaying the Source Select screen Adjusting the Monitor Display Position and Quality ............................................. 61 Displaying the Screen Control screen Displaying the Angle Control screen Setup Menu ................................................ 62 Setup Menu ............................................................
Before Use 2WARNING Audio units you can control from the KVT-817DVD Receiver (As of June, 2005): To prevent injury or fire, take the following precautions: KTC-SR901, KTC-SR902, KTC-SR903, KTC-HR100, KTC-HR100MC, KTC-HR100TR, KHD-CX910, KHD-C710, KTC-WB100, KDC-C719, KDC-C669, KDC-C469, KDV-C810, KDC-CX89, KDC-CX87, KDC-C717, KDC-C667, KDC-C467, KDC-D301, KDC-CX85, KDC-C715, KDC-C665, KDC-C465, KDC-CX82, KDC-C712, KDC-662, KDC-D300, KMD-D400, KTC-9090DAB, KTC-V500N (Set the "O-N" switch to "N" position i
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 Icons on the DVD discs Icon Description Indicates the region code where the disc can be played. 8 Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages) 32 Number of subtitle languages recorded with the subtitle function.
Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, that the MP3/WMA/JPEG/MPEG recording media and formats acceptable are limited. When writing MP3/WMA/JPEG/MPEG, pay attention to the following restrictions. Acceptable media The MP3/WMA/JPEG/MPEG recording media acceptable to this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/ RW. When using CD-RW, do full format not quick format to prevent malfunction.
MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
Opening/Closing the Monitor and Power Switch Open the monitor [OPEN/CLOSE] key Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. [SRC] key • Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, you may be hurt or the equipment may be damaged. • Do not try to open or close the monitor by hand. • You can automatically open or close the monitor when you turn on or off the ignition key.
Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Two hooks • Close the monitor first, then remove or attach the protection panel. • After you have removed the protection panel, you cannot operate the receiver. • After you have removed the protection panel, you can flash the burglar alarm lamp (page 82).
KVT-817DVD Basic operations ■ When the monitor is open SCRN MODE S M.CTRL V.SEL M V.OFF V FNC AV OUT SEL F OPEN/CLOSE ATT DISP ■ When the monitor is closed OPEN/CLOSE ATT DISP 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 4 Search Selectors [22]/[33] key Searches a disc backward or forward. 2 Stop to Play [7] key Stops to play. 5 Eject Disc [0] key The disc is ejected. 3 Play/Pause [38] key Pauses and replays a disc. 6 Video source selection/V.OFF [V.
Band/Folder Selectors [FM]/[AM] key [FM] key switches to the FM1/2/3 band or next folder/ disc. [AM] key switches to the AM band or previous folder/ disc. DVD/VCD TV */ Video R-CAM * p Attenuater [ATT] key Attenuaters the volume. Press it again to cancel muting. Navigation * * Optional accessory You can also turn off the video display by pressing the key longer than 1 second. When you press the key again, the previous video display comes back on.
Basic Operations of Remote Controller 2 NAV 14 18 ENTER CANCEL MENU 4 TV DVD AUD 15 BAND+ u ATT 4 ¢ d 38 RETURN – BAND+ u ATT 4 ¢ ZOOM OUT VOL 7 ZOOM IN POSITION CANCEL MENU 6 VOL ENTER RETURN – ZOOM OUT SR C SR C TV DVD AUD 1 5 L SE V. L SE V. 3 NAV d ZOOM IN POSITION 8 38 17 9 MODE PBC ROUTEM VIEW MENU MAPDIR AV OUT TOP MENU 12 VOICE 2-ZONE SC1 ZOOM SC2 OPEN u 13 16 1 .
6 [BAND] key DISC (When 1 is set to "DVD" or "AUD") Select a disc and a folder. TV (When 1 is set to "TV" or "AUD") BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2. TUNER (When 1 is set to "AUD") +: Switches to the FM1, FM2, or FM3 band. –: Switches to the AM band. Selects the icon. 7 [4]/ [¢] key DISC (When 1 is set to "DVD" or "AUD") Selects a song. TV (When 1 is set to "TV" or "AUD") Select a channel. TUNER (When 1 is set to "AUD") Selects a station. NAV Selects an icon or scrolls horizontally.
Basic Operations of Remote Controller o [0] – [9] key TV (When 1 is set to "TV") TUNER (When 1 is set to "AUD") — : Recall the stations on memory. 1 .? & [ ]/[ ] key VCD (When 1 is set to "DVD") : Slow Backward. : Slow Forward. DVD 6 MNO NAV You can enter a character/number. [SUBTITLE] key DVD (When 1 is set to "DVD") : Switches a subtitle language. 6 MNO [AUDIO] key VCD (When 1 is set to "DVD") : Switches an audio language. DVD 3 DEF [1]/[¡] key (When 1 is set to "DVD") 1: Fast Backward (Rewind).
About discs Handling discs Removing discs • Do not touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. Discs that cannot be used • Discs that are not round cannot be used. • CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVD-R/RW, or DVD+R/RW after reading the caution items on the package etc. • Do not stick a tape, sticker, etc., on the disc. Also, do not use a disc with those materials pasted on it.
Switching Small Display The Small Display screen mode changes each time the [DISP] key is pressed. S M V F OPEN/CLOSE ATT DISP [DISP] key "AUX EXT" STANDBY "STANDBY" Navigation "NAV" Band & Preset Number HD RADIO Band & Preset Number Band & Preset Number * Hold down the [DISP] key more than 1 second to switch to the Frequency display. 16 | English B64-3171-00_00_K_En.indd 16 05.5.
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. S M V F OPEN/CLOSE ATT DISP Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed.
Control during Controling during DVD DVD Video, Video, DVD Video Audio CDor , JPEG Video orCD MPEG Playback Playback Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc, a JPEG or MPEG files. Displaying the DVD/VCD/JPEG/MPEG Playback screen You can use the following operations when displaying DVD/VCD/JPEG/MPEG images. Plays back the DVD/ VCD or JPEG/MPEG files.
Before Use JPEG/MPEG playback screen DVD MEDIA 13 3 Mode: FULL 15 P 0:01:48 1 e Folder/File Number Display 18 r Forword File Search Area Selects the next folder or file. AVOUT: TV 16 14 t Backword File Search Area Selects the previous folder or file. y Picture Control Button Area (page 23) JPEG playback only. 17 u Information Display Button Area (page 23) i Play Time Display • The Easy control panel functions are seeing page 24.
Control during DVD Video, DVD Audio or Video CD Playback Displaying the DVD/VCD Control screen g Adjusts the volume. Plays a DVD/VCD using various functions. h Ejects the disc from the built-in disc player. j Calls the Sound Effects Menu. (page 90) F k Displays the Source Select screen. (page 60) l Calls the Setup Menu. (page 62) DVD/VCD Control screen / Fast Forwards or Fast Backwards.
Controling during DVD Video, Video CD, JPEG or MPEG Playback English | B64-3171-00_00_K_En.indd 21 21 05.5.
DVD Disc Menu 2 Disc Menu Selects an option from the DVD Disc Menu. 1 Select Disc Menu options Display the Disc Menu Control screen Cancel DVD Disc Menu Control Buttons Area (page 18) 1 Menu Control TOP 3 MENU Menu 6 ANGLE 2 MENU Ctrl 1/1 SUB 3 1/1 5 3 5 6 ZOOM 7 Enter 1/1 RTN Top 1 3 4 AUDIO 4 3 2 Highlight Exit 8 Cancel Exit 1 Calls the Menu. 2 Returns to the Disc Menu Control screen. 3 Selects a menu option. 4 Enters your menu selection.
Controling during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Information Display Displays an enlarged VCD screen. Displays the DVD and AV information. 1 Information Display Button Area (page 18,19) Display the Zoom Control screen Zoom Control Button Area (page 18) The information is displayed for 5 seconds. Zoom Control Top Direct Search 2 You can search for a DVD/VCD chapter, scene or track by entering its number.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback. Displaying the Easy Control Panel The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 2 Switches the source. 3 Stops to play the built-in disc player. 4 Fast Forwards or Fast Backwards. (only when a CD is played back on the built-in disc player) F 5 Selects a song or data.
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Control screen During CD playback You can play the CD/MP3/WMA/JPEG/MPEG/Disc changer using various functions. 9 Adjusts the volume. p Calls the CD Menu. F q Calls the Sound Effects Menu. (page 90) w Displays the Source Select screen. (page 60) e Calls the Setup Menu. (page 62) CD Control screen MENU 9 r Ejects the disc from the built-in disc player.
MP3/WMA/JPEG/MPEG Control screen During MP3/WMA/JPEG/MPEG play MENU 31 30 31 33 / Ejects a disc. 32 34 z Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 33 Direct SRC Next 36 43 SCN 35 REP 3 37 Folder - RDM 38 Folder + DISP 1 39 SCRL P 00:03:24 44 47 - 45 35 DVD MEDIA 41 FREP 42 - 40 - AM 12:56 - - - 46 IN x Stops to play. When pressed twice, the disc is played back from its beginning in the next time. c Selects a song or data.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Disc Changer Control screen During play by the disc changer MENU Disc + 48 I Selects a track. Starts Fast Forward or Fast Backwards when it is held down. 49 50 48 Direct SRC Next 51 SCN 56 REP 60 D 3 RDM 53 T 5 61 49 CD-CH Disc 52 - DISP 57 SCRL 62 P 01:24 TIME DREP 54 MRDM 55 - - AM - O Selects a disc. 59 12:56 64 - 58 : Plays or pauses.
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Menu screen You can select menu options using various functions. Selects options from various function menus. Returns to the CD/MP3/WMA/JPEG/MPEG/Disc Changer Control screen. MENU • The available functions vary depending on the source used. CD Menu screen Name Set 65 MENU 66 CD 28 | English B64-3171-00_00_K_En.indd 28 05.5.
Before Use CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Set Disc Name Select Folder (during MP3/WMA/JPEG/ MPEG play) Names a CD. 1 2 Play a CD you wish to name Call the CD/Disc Changer Menu The folders of an MP3/WMA/JPEG/MPEG disc are listed for quick search. 1 Call the MP3/WMA/JPEG/MPEG Menu MENU MENU 3 Select the Set Name mode 2 Start the Select Folder Name Set Folder Select 2. Upper Folder Name MENU 1 • The Name Set position varies depending on the disc you are playing.
ID3/WMA TAG Display (during MP3/ WMA play) Disc Select (during play by disc changer) The ID3/WMA TAG information of MP3/WMA file is listed. The discs loaded on the disc changer are listed for quick disc selection. 1 1 Call the MP3/WMA/JPEG/MPEG Menu Call the Disc Changer Menu MENU 2 MENU Display the ID3/WMA TAG 2 Call the Disc Select Menu CH Disc Select Infomation MENU 1.KENWOOD MENU Title: KENWOOD 2 DISP 1 2.KENWOOD Artist: KENWOOD 1 3.KENWOOD Album: 4.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player 1 Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed.
Tuner Control Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel 1 Adjusts the volume. The Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. 3 Switches the band (to AM or FM1/2/3). 4 Tunes in a station F 5 Switches the Seek mode. (see page 34 for the ) Displaying the Easy Control Panel 1 • For receiver key operations, see (page 10).
o Selects the Program Service Name, Station Name, or Radio Text mode for text display. ; Scrolls the diaplay text. a When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (page 34) or (page 34). s Indicates current Seek mode. d Clock Display When touched, the display of Clock 1, Clock 2 and Clock 3 are switched one after the other.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK FM If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. 2 AM Store in memory 2sec. Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. AUTO 1 AUTO 2 MANUAL 1 2sec.
Tuner Control Preset Select Set Station Name Lists and tunes in stations in memory one after the other. Names a station. 1 1 Tune in a station you wish to name Call the Tuner Menu FM AM MENU 2 2 Call the Tuner Menu Call the Preset Select Menu MENU Preset Select MENU P1 87.9 MHz 1 3 Select the Set Name mode 4 5 DISP P2 90.1 MHz Name Set P3 98.1 MHz P4 87.9 MHz 2 3 2 FM 1 TUNER 4 P5 87.9 MHz FM1 For character entry details, see (page 59). P6 87.
Direct Search Traffic Information Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Select a band – 2 BAND+ When the traffic bulletin starts... Select the Direct Search mode The Traffic Information screen appears automatically. Traffic Information screen # BS MENU DIRECT 1 3 1 2 4 TI Enter a frequency 0 — 9 WXYZ 3 When you enter frequency, signal reception starts.
Tuner Control Search for Program Type Radio Text A program is tuned when you set its program type. (Only when receiving the FM broadcast.) You can display the radio text. (Only when receiving the FM broadcast.) 1 1 Call the Tuner Menu Call the Tuner Menu MENU MENU 2 2 Call the PTY Search Menu Display the Radio Text Radio-Text PTY Search 5 MENU 2 FM 1 None 2 INFORMATION SRCH 3 SPORTS USER 4 TALK ROCK 2 MENU 1 NEWS Preset 3 1 RadioText TUNER 98.1 MHz None FM 1 Preset 3 98.
TV/ VIDEO Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Displaying the TV Picture screen 1 TV Band Number Display Various control screens appear in the TV Source mode. 2 Memory Number Display 3 Channel Number Display Select the TV Pictures. V 4 Channel Up Area Increase the channel. 5 Channel Down Area Decrease the channel.
Displaying the TV Control screen r Adjusts the volume. You can tune in a TV station using various functions. t Calls the TV Menu. y Calls the Sound Effects Menu. (page 90) u Displays the Source Select screen. (page 60) F i Calls the Setup Menu. (page 62) o Switches to VIDEO1 or VIDEO2. TV Control screen ; Switches to TV1 or TV2.
Displaying the TV Menu screen You can select menu options using various functions. k Selects option from various function menus. l Returns to the TV Control screen. MENU TV Menu screen Preset Select 28 MENU Name Set 29 TV 40 | English B64-3171-00_00_K_En.indd 40 05.5.
Before Use TV/ VIDEO Control Seek Mode Auto Memory Sets a TV station selection. Stores stations with good reception in memory automatically. SEEK 1 If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. AUTO 1 AUTO 2 MANUAL Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next channel manually.
Before Use Manual Memory Preset Select Stores the current receiving channel in memory. Lists and tunes in stations in memory one after the other. 1 Select a channel you wish to store in memory 1 Call the TV Menu TV MENU 2 (Page 39 t) Store in memory 2sec. 1 2sec. — 2 Call the Preset Select Menu 6 If 1 to 6 are not shown, touch Next . Continue to touch until the memory number appears.
TV/ VIDEO Control Set Station Name Direct Search Names a station. Tunes in a station when its channel number is entered. 1 Select a station you wish to name 1 Select the Direct Search mode TV # BS DIRECT 2 Call the TV Menu 2 MENU Enter a channel number (Page 39 t) 0 3 When you enter a channel number, signal reception starts. Example: When you receive Channel 06 0 6 MNO Enter a name For character entry details, see (page 59).
SIRIUS Tuner Control Various control screens appear in the SIRIUS Tuner source mode. (with the optional accessory SIRIUS Tuner connected only) Displaying the Easy Control Panel 1 Adjusts the volume. The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. 3 Switches the band. F 4 Tunes in a channel. 1 5 Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other.
i When 1 to 6 buttons appear, you can recall channel on memory. For memory of channel stations, see (page 46) . o Indicates current Seek mode. ; Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the SIRIUS Tuner Menu You can select menu options using various functions. MENU a Selects option from various function menus. s Returns to the SIRIUS Tuner Control screen.
Channel Search 3 Select a category The categories and channels are listed for your channel selection. 1 Call the SIRIUS Tuner Menu The channel list of the selected category appears. Channel Selection screen MENU MENU 2 etc. cat.HITS 0 1 ch.Pure Jazz 4 Start Channel Searching ch.Jazz En Clave ch.Planet Jazz Channel Search SIRIUS 2 ch.Jazz Cafe ch.Standard Time The category list appears. RTN 3 2 Category Selection screen MENU 3 cat.HITS 0 1 1 Tunes in a channel.
SIRIUS Tuner Control Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio Tuner connected only) Displaying the Easy Control Panel 1 Adjusts the volume. The HD Radio Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. 3 Switches the band (HD FM1/2/3, HD AM). 4 Tunes in a station. F 5 Switches the Seek mode.
o When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (page 50) or ( page 50). ; Indicates current Seek mode. a M/S Indicator s Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the HD Radio Menu screen You can select menu options using various functions. MENU d Selects option from various function menus. f Returns to the HD Radio Control screen.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK HD FM If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. 2 Store in memory 2sec. Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency or channel manually. AUTO 1 AUTO 2 MANUAL HD AM 1 2sec.
HD Radio Control Receive Mode Title Display The digital or analog program is selected and received. An information about the received song is displayed. 1 1 Call the HD Radio Menu Call the HD Radio Menu MENU 2 MENU 2 Call the Receive mode Menu Display the Title screen Receive Mode Title MENU Title screen 3 Receive Mode 1 Auto 2 1 MENU 3 2 HD RADIO 2 2 1 Switches the Receive mode. 2 Receive mode Display. 3 Returns to the HD Radio Menu.
DAB Tuner control Various control screens appear in the DAB Tuner source mode. (with the optional accessory DAB Tuner connected only) Displaying the Easy Control Panel 1 Adjusts the volume. The DAB Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. 3 Switches the band (to DAB1/2/3). F 4 Selects a service. 5 Selects the Ensemble. Displaying the Easy Control Panel 6 Switches the Seek mode.
; When 1 to 6 buttons appear, you can recall a service on memory. a Indicates current Seek mode. s Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the DAB Tuner Menu screen You can select menu options using various functions. d Selects option from various function menus. f Returns to the DAB Tuner Control screen. • For DAB Tuner function details, see the Instruction Manual of DAB Tuner (optional accessory).
Seek Mode Service Preset Memory A service selection method can be set. The current receiving service is stored in memory. 1 Select a service you wish to store in memory SEEK Band If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. Service 2 + AUTO 1 AUTO 2 MANUAL - Store in memory 2sec. Tunes in a ensemble with good reception automatically. Tunes in service in memory one after another. Switches to the next channel manually.
DAB Tuner control Service Select Language Filter The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. 1 1 Call the DAB Tuner Menu Call the DAB Tuner Menu MENU MENU 2 2 Call the Language Filter Menu Call the Service Select Menu Language Filter Service Select MENU MENU 3 3 1 Service Name Language Service Name LANG Filter Off 1 Service Name 2 Service Name Service Name 1 SRCH 2 DAB DAB 2 1 Selects a service.
Search for Program Type 3 Select a program type The services are received when you set its program type. 1 Call the DAB Tuner Menu Select a Language 1. Display the Language select screen MENU 2 LANG Call the PTY Search Menu MENU PTY Search PTY News SRCH MENU 4 2 Language English PTY News 1 1 SRCH LANG 1 2 1 DAB RTN 3 3 DAB 1 Selects a Language. 2 Searches for the program type. 3 Returns to the PTY Search Menu. 1 Selects a program type. 2 Searches for the program type.
DAB Tuner control DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu When the announcement starts... MENU The Announcement screen appears automatically.
Weather Band Tuner Control Various control screens appear in the Weather Band Tuner source mode. (with the optional accessory Weather Band Tuner connected only) Displaying the Easy Control Panel The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 2 Switches the source. 3 Tunes in a station. F • For system key operations, see (page 10).
Character Entry How To Use the Character Entry screen 1 Shifts the cursor. When you select the Set Disc Name mode or others, the following screen appears for character entry. 2 Enters a space. If you erase a character, locate the cursor on it and touch this button. Character Entry screen 3 Enters characters. 1 1 2 4 Scrolls up or down the character button display.
Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen • The Source Select screen can be displayed from the control screen of any source F Press this key several times unit the Control screen appears. Control screen MENU Direct SRC PBC REP DVD VIDEO Title 1 Chap KENWOOD - 3 - SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Source Select screen 1 Adjusts the volume. 2 Select the source.
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen 1 Brightness Control Disabled if the Auto Dimmer is On. You can adjust the picture quality using the following keys. 2 Tint Control Displayed for an NTSC system image on TV or Video. S 3 Color Control Displayed on the TV and Video screen only.
Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen • You can call the same Setup Menu for the Control screen of each source. F Press this key several times until the Control screen appears. Control screen MENU Direct SRC PBC REP Title 1 Chap KENWOOD DVD VIDEO - - 3 SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Setup Menu screen 1 Adjusts the volume. 2 Scrolls the Setup Menu. 3 Calls each Setup Menu. 4 Calls the Sound Effects Menu.
English | B64-3171-00_00_K_En.indd 63 63 05.5.
Control during DVD Video, DVD Audio or Video CD Playback Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen 1 Adjusts the volume. If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 2 Returns to the Control screen of the previous source.
Before Use Setup Menu Displaying the Channel Level screen You can set the volume at each setup position. r Selects a speaker to be set. (see , page 67) t Sets the speaker volume. (see , page 67) y Starts or stops test signal tone output for setup check. Channel Level screen u Displays the Speaker Set Up screen. MENU Test 14 15 17 Front Right +10 dB 16 15 Channel Level English | B64-3171-00_00_K_En.indd 65 65 05.5.
Speaker Set Up 2 Select a speaker type You can select a speaker type and its size to get the best sound effects. 1 Select a speaker you wish to adjust You can select any of the following speaker types.
Before Use Setup Menu Channel Level You can set the volume at each setup position. 1 Select a speaker you wish to adjust (Page 65 r) Channel Level setup screen MENU 1 Test 2 3 Front Right +8 dB 4 5 6 Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer 2 Adjust the volume English | B64-3171-00_00_K_En.indd 67 67 05.5.
Before Use DTA Setup 3 Set a delay time Manually sets the sound output timing of each channel. 1 Display the DTA Setup screen DTA The speakers are virtually moved to the desired distance. When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward. (Page 64 6) DTA Setup screen DTA 1 Front 0.50 feet 2 2 3 Return 1 Selects a speaker to be adjusted.
Before Use Setup Menu Crossover Network Setup You can manually set a crossover frequency of speakers. X'Over X'Over (Page 64 p) 0dB LPF Subwoofer 100Hz Frequency 1 1kHz 4 80 Hz 1 12dB/Oct 2 Phase Phase Normal Normal Slope 2 3 Return 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen. 4 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set). The phase is reversed 180 degrees when set to "Reverse".
Before Use DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. DVD SETUP 3 Calls the Sound Effects Menu. (page 90) DVD SETUP 1 screen MENU 4 1 4 Calls the Setup Menu. Menu Language en 5 Set 6 6 Selects a subtitle language.*1 (See , page 72) Set 7 7 Selects an audio language.
Before Use Setup Menu Displaying the DVD SETUP 2 screen DVD SETUP 2 screen MENU Parental Level Set 10 Off 11 OFF Angle Mark 11 On Screen Ratio 4:3 LB 12 DVD SETUP 2 14 12 p Displays the Parental Lock screen.*1 ( OFF) (See , page 73) q Sets an angle mark display. ( On) w Selects the screen display mode.*1 ( 16:9) "16:9": Displays wide pictures. "4:3 (LB)": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen).
Language Setup Selects a language you use for the speech and menus. 1 Display the Language Setup screen See (page 70) and select a language you wish to use. Audio Language Set 2 1 4 3 5 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Clears the language code. 4 Sets the original audio language. (It appears during audio language setup.) 5 Sets the language and returns to the DVD SETUP 1 screen.
Before Use Setup Menu Parental Level Setup 3 Display the Parental Level Setup screen Sets a parental level. Enter 1 Display the Parental Level code number screen Set Return (Page 71 p) Parental Pass Cancel 2 1 Level 5 1 2 3 4 5 6 7 8 9 1 Level 5 Clear 3 Enter 1 4 0 1 Sets a parental level. 2 Returns to the DVD SETUP 2 screen. 5 1 Enters a code number. 2 Cancels the current setup and returns to the DVD SETUP 2 screen. 3 Clears the code number.
System Setup You can set up the system parameters. Displaying the System 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. System Set Up 3 Calls the Sound Effects Menu. (page 90) System 1 screen MENU 4 1 4 Calls the Setup Menu. 5 Turns the key touch tone On or Off. ( Beep 5 On Off 5 1 3 Scroll 6 Manual 2 Remote Sensor 7 On Off 7 1 1 System Set UP 1 8 7 Selects a remote control signal.
Setup Menu Displaying the System 2 screen 9 Sets a music CD playback. ( 1) "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD having a special format or if you cannot play a disc in the "1" position. System 2 screen MENU CD Read 1 9 Key illumination color Green 10 Display illumination color Blue 12 System Set Up 2 11 • You cannot play an MP3/WMA/VCD disc in the "2" position.
Control during DVD Video, DVD Audio or Video CD Playback AV Interface You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. AV Interface 3 Calls the Sound Effects Menu. (page 90) AV I/F 1 screen MENU 4 1 4 Calls the Setup Menu.
Before Use Setup Menu Displaying the AV I/F 2 screen p Sets a method to switch to the rear view camera video display. ( Off) "On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse". AV I/F 2 screen MENU R-CAM Interruption 10 On R-CAM Mirror Normal 11 DVD 12 AV-OUT 12 AV I/F 2 13 14 "Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times.
Control during DVD Video, DVD Audio or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. User Interface 3 Calls the Sound Effects Menu. (page 90) User I/F 1 screen MENU 4 1 4 Calls the Setup Menu. 5 Switches the wall paper. ( Background Change Light 5 1 3 Background Movie On 6 2 Off 6 7 Selects a frame pattern.
Setup Menu e Sets an on-screen display of the TV screen. ( Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. r Displays the User I/F 1 screen. t Displays the User I/F 3 screen. Displaying the User I/F 3 screen y Turns the information display On or Off when a button is touched on the Source Control screen. ( On) u Sets a point display when you touch the screen.
Touch Panel Adjustment 3 Adjust the positions You can adjust the touch panel operations. 1 Display the Touch Panel Adjust screen Touch the center of left lower and right upper when requested. Touch If is not shown, touch to display it. Touch Next or Prev. MENU 4 1 1 3 Touch Panel Adjust Set 2 5 1 1 Touch 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 90) 4 Calls the Setup Menu.
Setup Menu Clock You can adjust the clock time. 1 Display the Clock screen Clock If is not shown, touch to display it. Clock Next MENU 1 4 6 3 1 7 5 2 or Prev. AM 11:18 7 6 Reset RDS Synchronize Off 8 9 1 1 Clock 2 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 90) 4 Calls the Setup Menu. 5 Clock time display. 6 Adjusts hours. 7 Adjusts minutes. 8 Sets "00" minute.
Before Use Security Code Setup 2 Start the security code registration You can set a security code to protect your receiver system against theft. Set PassWord Cancel • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 3 1 1 2 3 4 5 6 7 8 9 Display the Security Code Setup screen 0 2 Security If Clear is not shown, touch to display it.
Before Use Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 0 — 9 You must enter the same security code as that you have entered in Step 3 above. 2 Enter the security code Enter Now, you can use your Receiver. English | B64-3171-00_00_K_En.indd 83 83 05.5.
1 Recalls the memorized settings. 2 Memorizes the current Audio Set Up and AV Interface settings. 3 Clears the currently memorized settings. 4 Returns to Set Up Memory screen. Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
Setup Menu SIRIUS Setup You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only) Displaying the SIRIUS Set Up screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. SIRIUS Set Up 3 Calls the Sound Effects Menu. (page 90) SIRIUS Set Up screen 4 Calls the Setup Menu. 5 Displays the SIRIUS ID MENU 4 1 1 3 Sirius ID 2 • If 123456789012 5 SIRIUS Set Up Next 1 is not shown, touch to display it. Prev.
DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen 1 Adjusts the volume. 2 Calls the Sound Effects Menu. (page 90) DAB Set Up 3 Returns to the Control screen of the previous source. DAB Set Up screen MENU 4 1 4 Calls the Setup Menu. DAB Priority Off 5 DRC Off 6 Regional INT Off 7 5 Turns the DAB Priority On or Off. 1 2 3 PTY Watch 7 Turns the Regional Announcement function On or Off.
Setup Menu Announcement Selection 2 Set the announcement parameters You can set various announcement reception parameters.
Setup Menu AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen 1 Adjusts the volume. 2 Calls the Setup Menu. 3 Calls the Sound Effects Menu. (page 90) 4 Returns to the Control screen of the previous source. AMP Control screen 5 Setup option and value display MENU 2 1 6 1 3 7 7 7 Selects a set value. 4 8 Enters the set value. 6 Set 5 • If 1 AMP Control 88 | 8 AMP 1 VOLT 14.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and systemis paused. Phone Call ("CALL") screen MENU CALL CALL If you want to continue to listen to the audio source during phone call... The system resumes audio play during the phone call. When the call ends... Hang up the phone. The system resumes playing automatically.
Before Effects Sound Use Menu Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen • You can display the same Sound Effects Menu on the Control screen of any source. F Control screen MENU Direct SRC PBC REP DVD VIDEO Title 1 Chap KENWOOD - - 3 SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Sound Effects Menu screen 1 Adjusts the volume. 2 Calls the Sound Effects Menu. 3 Calls the Setup Menu.
Before Use Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Audio Control 3 Calls the Setup Menu. (page 62) Audio Control screen MENU 4 1 4 Calls the Sound Effects Menu. 5 Adjusts the right and left volume balance. Balance / Fader 6 1 Vol. Offset -5 7 2 7 7 Adjusts the volume of the present source based on the difference level of original volume.
Control during DVD Video, DVD Audio or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Equalizer 3 Calls the Setup Menu. (page 62) Equalizer screen MENU 4 1 5 4 Calls the Sound Effects Menu. BMS AMP Bass Flat 6 BMS AMP FREQ Normal 7 1 5 Adjusts the bass boost of the B.M.S power amplifier (optional accessory). P-EQ 2 • You may not set some models of power amp boost to "+18".
Sound Effects Menu Parametric Equalizer 5 Set a gain 6 Set a Q value You can manually set the equalizer curve by adjusting the center frequency, gain and Q value. 1 Display the Parametric Equalizer screen P-EQ Q- Parametric Equalizer 1 Flat 9 1 7 6 7 Q+ Close the Parametric Equalizer screen 6 Return Frq Gain Q 80Hz +9dB 1.00 Band1 1 2 Frq Gain Q 315Hz -7dB 0.25 Band2 3 Frq Gain Q 1.6kHz +9dB 0.50 Band3 Frq Gain Q 4 16kHz -7dB 0.
Surround Control You can set up the sound field. Displaying the Surround Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Surround Control 3 Calls the Setup Menu. (page 62) Surround Control screen 4 1 4 Calls the Sound Effects Menu. Stream Information 6 MENU Dolby Digital 2/0 48kHz Adjust 7 1 2 3 1 5 Dolby PL Music 5 1 Surround Control 5 Sets a sound field. You can select any of the following sound fields.
Sound Effects Menu Surround Control Adjustment • You cannot use the during playback of Multi channel source. • You cannot use the when the sound field of "Dolby PLII Movie", or "Dolby PLII Matrix" has been set. You can adjust the sound field.
SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. SRS WOW 3 Calls the Setup Menu. (page 62) SRS WOW Control screen 4 Calls the Sound Effects Menu. 5 Sets a SRS WOW. You can select any of the following sound fields. • "Off" • "Low" • "Middle" • "High" • "User" MENU 4 1 6 1 Adjust 2 Middle 3 5 5 Middle 1 6 Displays the SRS WOW User Setup screen.
Sound Effects Menu SRS WOW User Setup 1 Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust 2 1 1 TruBass 3 3 3 FOCUS 5 4 4 SRS 3D 1 5 1 5 Return 6 1 1 Adjusts the volume. 2 Selects a speaker to be set (Front, Rear or Center speaker). 3 Sets the TruBass effect level. 4 Sets the FOCUS effect level. 5 Sets the SRS 3D effect level. 6 Returns to SRS WOW Control screen. • FOCUS: Adjusts the vertical position of the speaker and sound image by virtual adjustment.
Position You can adjust the sound effects according to your listening position. Displaying the Position screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Position 3 Calls the Setup Menu. (page 62) Position screen 4 Calls the Sound Effects Menu. MENU 4 1 6 Adjust 1 2 Front R 5 6 Displays the Position Fine Control screen. (page 99) 5 3 7 P1 P2 1 P3 1 Position 5 Sets a listening position.
Sound Effects Menu 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer Position Fine Control You can fine-adjust your listening position. 1 Display the Position Fine Control screen Adjust 3 Set a delay time 4 Close the Position Fine Control Screen Position Fine Control screen Position Fine Control 1 2 1 Total DTA 0.33 feet 3 0.33 feet 3 4 4 5 1 Return Return 1 1 Adjusts the volume. 2 Selects a speaker to be adjusted.
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Zone Control 3 Calls the Setup Menu. (page 62) Zone Control screen 4 Calls the Sound Effects Menu. 5 Zone MENU 4 1 1 6 6 Rear Vol. 15 Dual Zone 2 6 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.
Glossary DVD: Digital Versatile Disc A type of disc which contains recording of audio/ video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of moving images. It compresses image information by about 1/120 and audio information by about 1/6 and accommodates up to 74 minutes of recording in a disc with the same diameter as ordinary music CD of 12 cm.
Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. • The rear speakers of DTA cannot be set. • The "Position Fine Control" of rear speakers cannot be set. • The "Channel Level" of rear speakers cannot be set. • The SRS CS II cannot be set. The rear speakers have been set to "NONE" on the Speaker Set Up screen (page 66). • No Surround Control (Sound Field) can be set.
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn on. ✔ The fuse has blown. After checking for short circuits in the wires, replace the fuse with one having the same rating. ✔ The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated.
? The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. ✔ The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. ? Radio reception is poor. ✔ The car antenna is not extended. Pull the antenna out all the way. ✔ The antenna control wire is not connected. Connect the wire correctly, referring to the section on .
Troubleshooting Guide ? The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. Clean the CD. ✔ The CD is upside-down. Load the CD with the labeled side up. ✔ The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. ✔ The disc is severely scratched. Try another disc instead. ? The sound skips. ✔ Something is touching the disc changer. Remove whatever is touching it.
Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Hot Error The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.
Specifications Specifications subject to change without notice. Monitor Section Picture size : 6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.
Specifications Video section Color system of external video input : NTSC External video input level (RCA jacks) : 1Vp-p/75Ω External audio max input level(RCA jacks) : 1V/22kΩ Analog RGB input : 0.7Vp-p/75Ω Audio section Maximum Power (Front&Rear) : 50Wx4 Full Bandwidth Power (Front&Rear)(at Less than 1%THD) : 22Wx4 Preout level (V) : 5V/10kΩ Preout impedance : 80Ω General Operating voltage : 14.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood CORPORATION 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN Kenwood CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
B64-3171-00_00_K_En.indd 110 05.5.
B64-3171-00_00_K_En.indd 111 05.5.
B64-3171-00_00_K_En.indd 112 05.5.
