ES020 series
$ # " !
1 2 3 4 know your Kenwood espresso machine before using for the first time Read these instructions carefully and retain for future reference. Remove all packaging and any labels. Wash the parts: see ‘cleaning’. Flush the machine through with clean water: see ‘before making coffee for the first time’.
to make espresso using ground coffee 5 Wait until the red light glows continuously indicating that the unit has reached the correct temperature. 6 Part fill a jug with milk – the milk may increase up to three times in volume so select a suitably sized jug. As a guide use 40-60 ml milk per cappuccino. ● Cold semi skimmed milk gives the best results. 7 Hold the jug in one hand and place the nozzle in the milk, ensure that the milk does not go above the join in the nozzle.
cup stand, drip tray Empty the drip tray regularly. You’ll know when it is full, the red float in the middle of the drip tray will rise and become visible in the hole on the cup stand. 1 Wash then dry. ● ● 1 2 3 4 1 2 3 4 5 6 7 coffee outlet After every use check that this area is clean and free from any coffee grounds. Wipe clean and if necessary carry out the following procedure to clean more thoroughly.
trouble shooting guide problem Espresso coffee doesn’t come out of the machine. Espresso coffee drips from the edges of the filter holder, instead of from the holes. The espresso coffee is cold The pump is too noisy. The coffee cream is light in colour and is dispensed too quickly. The coffee cream is dark in colour and is dispensed too slowly. The coffee has an acidic taste.
Head Office Address: Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www.kenwoodworld.
