Home Theater System User's Manual

38
|
KIV-700
Clock and Other Functions
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1 Enter Menu List mode
Press the [MENU] button.
2 Enter Demonstration mode setting
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3 Set the Demonstration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Muting Volume upon Reception of
Phone Call
The audio system automatically mutes when a call
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
68).
Activating Security Code
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select the Standby
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “STANDBY” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Security Code mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings” > “Security Set”.
When “Enter” is displayed, “– – – –” is also displayed.
4 Enter Security Code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
5 Confirm the Security Code
Press the [Volume] knob for at least 2 seconds.
When “Re-Enter” is displayed, “– – – –” is also
displayed.
6 Do the step 4 through 5 operation, and reenter
the Security Code.
“Approved” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 4 through 5, repeat
from step 4.
7 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.