CD PLAYER DP-R7090 DP-R6090 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used for two models. Model availability and features (functions) may differ depending on the country and sales area.
Introduction DP-R7090/R6090 (En) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ................................................................ AC 120 V only Australia .................................................................................. AC 240 V only *AC voltage selection Europe and U.K. ..................................................................... AC 230 V only China .......
DP-R7090/R6090 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
System connections DP-R7090/R6090 (En) 4 Malfunction of microcomputer Caution: Do not plug in the power lead until all connections are completed. If operation is not possible or erroneous display appears even though all connections have been made properly, reset the £ microcomputer referring to “In case of difficulty”. Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components.
DP-R7090/R6090 (En) 5 Connection to a general-use amplifier Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks (or AUX jacks) of the amplifier. Connection to digital amplifier or MD Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder, etc., using an optical fiber cable or coaxial cable which are commercially available in audio stores.
DP-R7090/R6090 (En) 6 SYSTEM CONTROL CONNECTIONS Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below.
Controls and indicators DP-R7090/R6090 (En) 7 Play indicator Text information display (The displays given in this manual are approximations only. They may differ from what actually appears on the display.) • •• • • •• • • • ••• •• Pause indicator DISPLAY 1 2 34 5 6 TEXT DISP. ALL INFO. 7 9 0 8 4 ¢ DISC 1 1 ¡ EDIT DISC 2 DISC 3 DISC 4 DISC 5 P.MODE TIME DISP.
Operation of remote control unit DP-R7090/R6090 (En) The keys with the same name as those on the main unit operate the same way as the main unit. The keys marked * are provided only on the remote control unit. 8 1 2 RANDOM 1 DISC SELECTOR 2 REPEAT 4 5 DISC SKIP P.MODE 1 2 3 TIME DISPLAY 4 5 6 EDIT 7 8 9 CHECK TEXT DISPLAY 0 +10 CLEAR ALL INFO.
Preparing to Play Tracks DP-R7090/R6090 (En) Preparation • Turn the unit ON. 9 -ON –STANDBY REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. Loading/unloading discs 1 Load/unload a disc. 1 Open the tray. 0 ÷ Do not touch the played side of disc. ÷ Loading two discs together will cause malfunctioning. ÷ Place the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.
Normal play (TRACK mode) DP-R7090/R6090 (En) 10 Use the following procedure to play a CD in the original order of tracks from track No. 1. REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. Playing tracks in order from track No. 1 that the unit is in the normal play TRACK 1 Check ! mode. 2 Start playback. If there is no disc in the selected disc tray, the corresponding indicator " " goes off. Select the disc.
DP-R7090/R6090 (En) 11 Playback from desired track 1 Select the disc. REMOTE CONTROL UNIT RC-P0601 1 DISC SELECTOR 2 4 5 3 2 Select the desired track No. 1 2 3 4 5 6 7 8 9 0 +10 Press the numeric keys as shown below.... To enter track No. 23 : To enter track No. 40 : 003 0000) ÷ Playback starts from the selected track and continues on the subsequent tracks.
Searching for tracks by title (TITLE SEARCH) DP-R7090/R6090 (En) Preparation ÷ Load a disc (CD-TEXT support) in the CD player. ÷ Check that the unit is in the normal play TRACK mode. ! ÷ Press the ALL TEXT SEARCH key. 9 REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. 1 Press the TITLE SEARCH key. Blinks. TITLE SEARCH D 1 01 T I T L E A B C Track title REMOTE CONTROL UNIT RC-P0601 To stop the search, press the TITLE SEARCH key again.
Displays DP-R7090/R6090 (En) Time display on CD player (TIME DISPLAY) 13 Each press of the TIME DISPLAY key changes the displayed contents. Do this operation in the play mode. TIME DISPLAY REMOTE CONTROL UNIT RC-P0601 1 1 :2 3 2 - 2 :3 7 : Remaining time of track being played 3 2 3 :4 5 T : Elapsed time of entire disc 4 - 3 6 :2 5 T : Elapsed time of track being played (T lights up.) : Remaining time on entire disc (T lights up.
Programmed play (PGM mode) DP-R7090/R6090 (En) 14 Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Preparation ÷ Load a disc in the CD player. REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. 1 Press so that the “PGM” indicator lights. Blinks. Do this operation in the stop mode. P.MODE PGM01 DISC? REMOTE CONTROL UNIT RC-P0601 2 Program desired tracks. 1 Select the disc.
DP-R7090/R6090 (En) To check or change the programmed tracks Blinks. 1 Press the CHECK key. Press until the track No. to be changed is displayed. CHECK P GM 0 1 D 5 T NO. 25 REMOTE CONTROL UNIT RC-P0601 ÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display. ÷ Each time the key is pressed, the program No. and the track No. on CD are displayed. 2 Select the disc.
Repeated playback DP-R7090/R6090 (En) 16 Preparation ÷ Load a disc in the CD player. ™ REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. To repeat only the programmed tracks 1 Press so that the “PGM” indicator lights. P.MODE PGM01 DISC? REMOTE CONTROL UNIT RC-P0601 2 Select the disc. 1 DISC SELECTOR 2 4 5 3 REMOTE CONTROL UNIT RC-P0601 Go to step 3 within 8 seconds. 3 Select the desired track number.
DP-R7090/R6090 (En) 17 To repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. 1 Press so that the “PGM” indicator goes off. P.MODE PGM01 \ 01 REMOTE CONTROL UNIT RC-P0601 2 Switch REPEAT ON. REPEAT REMOTE CONTROL UNIT RC-P0601 The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). 3 Start playback.
Editing DP-R7090/R6090 (En) Preparation ÷ Load a disc in the CD player. ÷ Check that the unit is in the normal play TRACK mode. ! REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. 1 Light the “EDIT” indicator. Do this operation in the stop mode. Blinks. EDIT EDIT DISC? REMOTE CONTROL UNIT RC-P0601 Go to step 2 within 8 seconds. If more than 8 seconds have elapsed, press the key again. 2 Select the disc.
DP-R7090/R6090 (En) 19 REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. To check the edited contents E D I T A 01 CHECK REMOTE CONTROL UNIT RC-P0601 ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. Playing or recording the edited contents Note 6 Press the 6 key to start playback according to the edited content.
Playback in a random order (Random playback) DP-R7090/R6090 (En) 20 As tracks are selected at random, you can enjoy listening to for a long time. Preparation ÷ Load a disc in the CD player. ™ REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. that the unit is in the normal play TRACK 1 Check ! mode. 2 Press the RANDOM key. During track selection: ”>“ and ”<“ move from the outside to the inside. RANDOM <<<><>>> « The number here changes.
Timer operations DP-R7090/R6090 (En) Timer playback of CD can be started at any time using an audio timer which is available in audio stores. Preparation This unit 21 System control cord ÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruction manual of the timer.) Audio cord Amplifier 12 : 00 To wall AC outlet Audio timer Turn the powers of the associated components 1 ON.
Maintenance DP-R7090/R6090 (En) 22 Disc handling precautions Cleaning Handling Hold compact discs so that you do not touch the playing surface. If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner. Label side ÷ Do not attach paper or tape to either Playing side Sticker the playing side or the label side of compact discs.
In case of difficulty DP-R7090/R6090 (En) What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microcomputer may fall into malfunction (impossibility to operate, erroneous display, etc.) when the connection cords are unplugged while the unit is ON or due to an external factor.
Specifications DP-R7090/R6090 (En) 24 DP-R7090 DP-R6090 [ Format ] System ............................ Compact disc digital audio system Laser ........................................................ Semiconductor laser [ Format ] System ............................ Compact disc digital audio system Laser ........................................................ Semiconductor laser [ D/A Convertors ] D/A Conversion ............................ 1 Bit (24 bit Fine D.R.I.V.E.) Oversampling ...............