User's Manual
Use guidelines
TRMS-RFS-DS002
Thisproductisusedinrefrigerationautoafter‐sales.Ittransmissionssignalthroughwireless.Itis
veryconvenientwhenyouinstallitintheauto;youdon’tneedmodificationanything.Thisproduct
includesamagneticstickandatransmitter.Theycanbedetectedthedooropen/closebythestate
and the current
state of the wireless transmissionto thereceiver, itwill displaythe stateon the
panel when the receiver receive thesignal. The display can hintuser state corresponding to the
open/closemonitoring.
Pleaseinstallingthetransmitteronthetopofthedoor,and installingthemagneticstickonthe
outerframe.Inordertoensureitsworkstatethedistancebetweenofthemasnearlyaspossible.
Thenfixeditbystandscrews.Pleaserefertodetailinstallationdrawings
MatchedwithlearnID:
After install this product, it must match with the learn ID of the new Host. Then they can
communicateeachother.
Inthefirststudy,pleasechangethereceivinghostintolearningmode;pleasereferTRMS‐400use
guidelines
Thenchangethestateofthedoor
fromclosetoopen.Thetransmitterofthedoorwilllaunchan
IDandaopeningdoorsignaldoorAndtheLEDofthetransmitterwillflash,TRMS‐400receiverwill
savethetransmitterafterreceivingtheIDofRFS‐DS002Iftherearemoredoorsonthecaritcan
learn ID ,Most
four transmitters Receiver will display sequence number flashing corresponding
door,Ifyoudon'tlearnpairingwithfourdoorsafter1minuteitwillexitlearningmode,Thereceive
willsavetheIDofthedoor.