User's Manual

Button 1
Encoding a Transceiver
1. Unplug HAR-1 from the MCM-9 and plug it back in, the siren will chirp 2 times and the lights
will flash 2 times.
2. Within 6 seconds of plugging in the HAR-1 turn ignition switch “ON” and “OFF” 3 times.
3. If step 2 is done correctly and within the time allowed , the siren will chirp 2 times and the
lights will flash an additional 2 times to confirm that the system is in “Learn Mode”.
4. Press and hold button 1 until the system chirps 2 times and the lights flash 2 times to
indicate that the MCM has learned the code. The transceiver echoes 4 chirps and the LCD
displays [LErn donE] to confirm that the transceiver is encoded.
5. If you are encoding a second transceiver repeat step number 4 for the second transceiver
before continuing to step number six.
6. Turn ignition “ON” and “OFF” to exit “Learn Mode”.
Note: The transceivers are programmed from the factory. Encoding is only necessary should
the transceiver lose its code and will not arm or disarm the security system or if a second
or re
p
lacement remote is obtained.
12 13
Sensor Memory Display
When the system is disarmed the turn signals will flash to indicate if there has been an alarm trigger.
The lights will flash once to indicate that the system has been disarmed, additional flashes indicate
that the following trigger has occurred:
1 flash then 1 additional flash = Shock Trigger
1 flash then 2 additional flashes = Tilt Trigger
1 flash then 3 additional flashes = Perimeter Sensor Trigger
1 flash then 5 additional flashes = Ignition Trigger
Motorcycle Battery Safeguard with “sleep mode”
If the optional perimeter sensor is being used and the alarm is armed for more then 10 days the
system will automatically disable the perimeter sensor.
If the alarm is armed for more than 30 days, the system will automatically shutdown its RF
capabilities. In this mode the transceiver will no longer be able to operate the system but the
system is still armed and protecting the bike.
To disarm, trigger the alarm, and press button 2.
A
dditional Information