SYNCSYNC-5 1 into 5 active DIN Sync Splitter Box Operating manual
Description The SYNC-5 has one DIN Sync Input and five DIN Sync output ports to enable you to connect several DIN Sync devices to one DIN Sync controlling device, without the usual problems encountered when daisy-chaining devices. The SYNC-5 outputs are all short circuit proof and each output can drive at least 2 sync inputs if required (however you’ll need splitter cable). The SYNC-5s active circuitry also restores the quality of signals received at the DIN Sync Input for optimum performance.
Specification Power 9V DC @ 10mA (regulated or unregulated) – never apply more than 12V (never use an unregulated supply greater than 9V as unregulated supplies typically give a higher output than shown) Power Input 2.1mm plug (centre positive) Sync In / Out 1 x 5 pin DIN input, 5 x 5 pin DIN outputs Weight 110g (excluding power supply) Dimensions 100 x 46 x 32 mm Power supply An energy efficient switch-mode PSU is supplied with unit.
