ME R GE - 4 4 into 2 MIDI Merge Box Operating manual
Description The MERGE-4 has four MIDI Inputs and two MIDI Out ports to enable you to connect several MIDI devices to one or two MIDI inputs. The MERGE-4 has opto-coupled MIDI Inputs and separate drive circuits for each MIDI Out socket for optimum performance. The MERGE-4 also contains active circuitry that can restore the quality of signals received at the MIDI Input that may have become degraded by losses in the MIDI cable.
Sysex Messages While any input is handling a SysEx message it becomes the SysEx master, and SysEx messages from all other inputs will be locked out until the message at the master input has finished. SysEX messages may be terminated either with an End Of Sysex command (F7) or with any other status command . Firmware version Request: A firmware version request must be issued within 10 seconds of power being applied to the unit, otherwise it will be ignored.
Specification Power Input: 9V DC (regulated or unregulated) – never apply more than 12V (never use an unregulated supply greater than 9V as unregulated supplies typically give a higher output than shown) Power : 60mA, 2.1mm plug (centre positive) MIDI ports: 4 x In, 2 x Out (both deliver the same data) Weight: 150g (excluding power supply) Dimensions: 110 x 80 x 32 mm Power supply: Supplied with unit. Specify UK, EU or US type when ordering.
