User Manual

5
Cleaning the filters
The filters should be periodically
checked and cleaned if
necessary. Frequency of cleaning
will vary with amount of use and
volume of dust collected.
WARNING: The performance of
the vacuum will be severely
compromised if the filters are not
regularly cleaned.
The filters must be correctly fitted
before using the vacuum cleaner
again.
Filters should be hand washed in
warm water only and allowed to
air dry. Do not wash the filters in a
washing machine or dry them in a
dryer.
Do not use the filters while they are
wet. This will reduce the suction
power and damage the motor.
1. Press the outlet lock to open the
outlet cover, take out the outlet
filter.
2. Press the button of front cover to
open the dust bin, Take the HEPA
filter out from the dust bin,
Wash the cyclone assembly.
WARNING:
Only use water without detergent
when you wash the filters, the
cyclone assembly, the inlet cover
and the dust collection container.
Dry them throughly before use.
3.
Replace the cyclone assembly
and the filter in the dust container.
When you place the filter on the
cyclone assembly, rotate the filter
until it locks in position.
Make sure the parts are in correct
positions.
Carefully place the dust collection
container on the vacuum cleaner
main body. Gently push the dust
container until it clicks and locks in
position.
If the dust collection container
does not click and lock, make sure
it is aligned correctly.
•