Installation Sheet

1. Installing the mounting plate
Installation instructions
CAUTION: Ensure the power is off at the main
fuse box prior to beginning installation.
5
GG
BB II CC
HH
Backplate
BB
□ Turn off the switch at the wall.
□ Turn the power off at the main fuse box.
□ Remove the backplate (BB) from back of the backplate by unscrewing two finials (GG).
□ Measure the distance between the keyholes on back of backplate, then mark spots on the wall.
□ Drill pilot holes on the marked spots and insert plastic anchors (HH). (If fastening with wood screws (II)
to studs, skip this step)
□ Attach the mounting plate (BB) to the outlet box using the outlet box screws (CC).
□ Secure the mounting plate (BB) to the wall with two wood screws (II).
Keyholes
2. Connecting the wires
□ Install the fixture bare copper wire (1) under the ground screw (EE) on the mounting plate (BB).
□ Connect the fixture bare copper wire (1) to the green (or bare, or green & yellow) supply ground wire (2)
in the outlet box using a wire nut (AA).
□ Connect the white fixture wire (3) to the white (or ribbed) supply wire (4) in the outlet box using a wire
nut (AA).
□ Connect the black fixture wire (5) to the black (or red, or blue) supply wire (6) in the outlet box using a
wire nut (AA).
House wire
black
(or red, or blue)
(HOT)
Fixture wire
black
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
white
(NEUTRAL)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Fixture wire
bare wire
(GROUND)
3
2
1
6
1
5
AA
4
EE