Installation Guide

MODEL: 60553
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH
PRIOR TO ASSEMBLY.
Assembly Time: 2 Minutes.
UNPACK THE SOLAR LED LIGHT STRING
The following parts should be included in your
solar light kits; path light, (1) solar panel, (1)
bracket and stake.
PANEL ASSEMBLY AND INSTALLATION
1.) Join path light and stake together as shown
below.
2.) Insert the stake into the ground in a sunny
area.
3.) Once charged for around 10 hours, your
solar LED path Light is ready for use.
TROUBLE SHOOTING
1.) If your path light are not functioning properly
or losing power mid-cycle, then ensure the solar
panel is positioned in direct sunlight. Your solar
panel will need to collect about 6 hours of
sunlight to function throughout a full cycle.
2.) Although the battery inside your seriously
solar panel is designed for maximum longevity,
Overtime performance will drop - replacing the
battery will correct this issue.
important notes:
1.) Although there may be some initial charge in
battery, we recommend fully charging it before
first use.
2.) To maximize solar energy intake, the solar
panel may be cleaned periodically with a soft rag
and water, do not use chemical solvents.