Instructions / Assembly
51080DS ASSEMBLY INSTRUCTIONS
Place decorative river stones (H)
onto top of fountain body (B).
Place pump access door (C) to
cover entry of fountain body (B).
Fill basin (A) with 2.6 gallons
of distilled water.
Connect the light connector from
fountain body (B) & (F) and screw
the cap tightly.
Plug pump (D) and light
transformer (F) into outlets and
turn light on at switch.
Use shims (G) to level the fountain
as necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.