Instructions / Assembly

51061CR ASSEMBLY INSTRUCTIONS
Place decorative black rocks (F)
onto top of basin (A).
Fill basin (A) with 4.8 gallons
of distilled water.
Connect the light connector (D)
and light cord of fountain body
(B) and screw the cap tightly.
Plug pump (C) and light
transformer (D) into outlets and
turn light on at switch.
Use shims (E) to level the fountain
as necessary.
Use water guiding pad (G) to
brush the top fountain surface
to achieve even water ow.
FINAL STEPS
Note: Light does not have to be on to operate pump.