Installation Guide

51056SS ASSEMBLY INSTRUCTIONS
Place pump access door (C) into fountain body (B)
to cover the entry.
Peel paper backing from the wall spacer pad (K) and
apply to back of the fountain body (B).
For floor applications skip to step 7.
Place mounting bracket (D) on wall in desired location,
ensure it is level and mark holes. Drill 6 mm (1/4”)
pilot holes on marked spots and insert (3) anchors (M).
Secure mounting bracket (D) to wall with (3)
supplied screws (L) and hang fountain assembly on
mounting bracket (D).
C
K
B
L
D
D
M
Hole in
wall
Fountain
assembly
We recommend using this fountain against a wall
if you want to use it as floor fountain.
(If fastening to studs, skip this step.)