Installation Guide

51051ORB ASSEMBLY INSTRUCTIONS
Bulb clip
Unscrew parts 2 x L and 2 x K from fountain body (B).
Insert light (I) into bulb clip.
Use 2 x K and 2 x L to secure lid (C) to fountain body (B).
For table applications: skip to step 7.
Place mounting bracket (D) on wall in desired location,
ensure it is level and mark holes. Drill 6 mm (1/4”)
pilot holes on marked spots and insert (3) anchors (O).
Secure mounting bracket (D) to wall with (3)
supplied screws (N) and hang fountain assembly.
C
I
B
K
N
D
D
O
Hole in
wall
Fountain
assembly
L
We recommend using this fountain against a wall
if you want to use it as table fountain.
(If fastening to studs, skip this step.)