Instructions / Assembly

51043ZC ASSEMBLY INSTRUCTIONS51043ZC ASSEMBLY INSTRUCTIONS
FINAL STEPS
Fill the reservoir with distilled
water between the ll lines.
Place the splash guard (C) into
the fountain body.
Connect the light connectors
(H) and (I) and screw the cap
tightly.
Plug light transformer (H) and
pump (G) into outlets and turn
light on at switch.
Note: Light does not have to be on to operate pump.
7
Attach the cord channel (F) to the wall with (2) supplied
screws (J). Place cords inside the cord channel (F) and
press the (2) cord covers (E) rmly on channel to secure.