You should have received the following parts in the package. Please ensure that all parts are accounted for.
ZEN TABLE FOUNTAIN Care and Instruction Manual
51041BRZ ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1041BRZ ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. To protect the finish, place all parts on a soft surface when unpacking. Choose a location: This freestanding water feature can be placed in the center of your space or against a wall. This water feature is designed to be used indoors or outdoors. Do not place on a surface that may be damaged by water as splashing may occur.
51041BRZ ASSEMBLY INSTRUCTIONS Place pump (E) into basin (A). Run pump cord through notch in back of basin (A). E A Place lower tray (B) onto basin (A).
51041BRZ ASSEMBLY INSTRUCTIONS Insert rubber hose through hole of upper tray (C). Place the large decorative river stone (D) onto the upper tray (D). D Rubber hose C Attach the pump (E) to the rubber hose.
51041BRZ ASSEMBLY INSTRUCTIONS Put the pump (E) back into the basin (A). Place the upper tray assembly (C) onto top of the lower tray (B). C E B A FINAL STEPS Fill the basin (A) with 1/2 gallon of distilled water. Place small decorative river stones (F) onto lower tray (B). Plug pump (E) into outlet.
51041BRZ ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Back cover Regulator Pump housing Filter/ Front cover Suction cup If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
51041BRZ ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. • To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
51041BRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51041BRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51041BRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.
www.kenroyhome.
