Installation Guide

Place two planters (C) to the sides of reservoir (A).
51036BRZ ASSEMBLY INSTRUCTIONS
Place pump access door (D) into basin (A).
Fill the basin (A) with distilled water between
the ll lines.
Place the splash guards (I, J, K) into fountain
body (B).
Connect the light connectors (G) and (H)
and screw the cap tightly.
Plug light transformer (G) and pump (F)
into outlets and turn light on at switch.
Use shims (E) to level fountain as necessary.
FINAL STEPS
Remove stoppers in bottom of planters for drainage if desired.
7
A
C
Stopper