Installation Guide

51035BLSL ASSEMBLY INSTRUCTIONS
Fill the basin (E) with 2.5 gallons
of distilled water, between the
ll lines.
Place pump access door (F) into
basin (E).
Place decorative river stones (K)
onto basin (E).
Place slate skirt (G) onto basin (E).
Connect the light connectors (I)
and (J) and screw the cap tightly.
Plug light transformer (I) and
pump (H) into outlets and turn
light on at switch.
Use shims (L) to level the fountain
as necessary.
Use water guiding pad (O) to
brush the fountain face.
Use metal card (P) to clear water
exit if necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.