Installation Guide

Use 2 x J and 2 x K to secure fountain body assembly
(B) to basin (A).
51033SL ASSEMBLY INSTRUCTIONS
B
K
J
A
Fill the basin (A) with 1.3 gallons
of distilled water, between the
ll lines.
Place pump access door (D) into
basin (A) to cover the entry.
Place decorative river stones (H)
onto top of basin (A).
Connect the light connectors (F)
& (G) and screw the cap tightly.
Plug pump (E) and light
transformer (F) into outlets and
turn light on at switch.
Use shims (I) to level the fountain
as necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7