Installation Guide

Place top assembly into middle reservoir (D) and
twist it clockwise to secure.
Attach pump (J) to the rubber hose.
51030ZC ASSEMBLY INSTRUCTIONS
Top assembly
Rubber
hose
D
J
Fill reservoirs (B, D, F) with
distilled water. Water level should
stay above ll line on pump access
door when fountain is running.
Place pump access door (H) to
cover entry of lower column (C).
Connect the light connectors (K)
and (L) and screw the cap tightly.
Plug light transformer (K) and
pump (J) into outlets and turn
light on at switch.
Use shims (I) to level the fountain.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7