You should have received the following parts in the package. Please ensure that all parts are accounted for.
TUCSON OUTDOOR FLOOR FOUNTAIN Care and Instruction Manual FPO
51030ZC ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1030ZC ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Choose a location: This freestanding water feature is attractive from all sides and can be used to highlight almost any area.
51030ZC ASSEMBLY INSTRUCTIONS Place lower reservoir (B) onto base (A) and rotate it clockwise to secure. B A Feed light power cord (L) then pump power cord (J) through plastic tube. Cord should exit through notch in base (A). Place bulbs (L) into bulb holders.
51030ZC ASSEMBLY INSTRUCTIONS Place lower column (C) into lower reservoir (B) and twist it clockwise to secure. Place middle reservoir (D) onto lower column (C) and rotate it clockwise to secure. D C B C Feed rubber hose through plastic tube. Place upper column (G) into upper reservoir (F) and twist it clockwise to secure. Place upper reservoir (F) onto middle column (E) and rotate it clockwise to secure.
51030ZC ASSEMBLY INSTRUCTIONS Place top assembly into middle reservoir (D) and twist it clockwise to secure. Attach pump (J) to the rubber hose. Top assembly D Rubber hose J FINAL STEPS Fill reservoirs (B, D, F) with distilled water. Water level should stay above fill line on pump access door when fountain is running. Place pump access door (H) to cover entry of lower column (C). 7 Connect the light connectors (K) and (L) and screw the cap tightly.
51030ZC ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Back cover Pump housing Suction cup Front cover Flow regulator If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
51030ZC ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. • To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
51030ZC ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51030ZC ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51030ZC ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.
www.kenroyhome.
