Installation Guide

A
A
I Light clip
B
Insert light (I) into light clip.
Place lid (A) onto upper fountain body (B).
51025SL ASSEMBLY INSTRUCTIONS
Fill the basin (E) with 2.5 gallons of
distilled water, between the ll lines.
Place pump access door (F) into
basin (E).
Place decorative river stones (J)
onto basin (E).
Connect the light connectors (H)
and (I) and screw the cap tightly.
Plug light transformer (H) and
pump (G) into outlets and turn
light on at switch.
Use shims (K) to level the fountain.
Use water guiding pad (O) to brush
the fountain face.
Use metal card (P) to clear water
exit if necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7