Installation Guide

Feed rubber hose through plastic tube. Place upper
column (F) into upper reservoir (E) and twist it
clockwise to secure.
Attach pump (I) to the rubber hose.
51022CON ASSEMBLY INSTRUCTIONS
Rubber
hose
F
Rubber hose
Plastic tube
E
I
Place pump access door (G) to
cover entry of lower column (D).
Fill reservoirs (C, E) with distilled
water. Water level should stay
above ll line on pump access
door when fountain is running.
Connect the light connectors (J)
and (K) and screw the cap tightly.
Plug light transformer (J) and
pump (I) into outlets and turn
light on at switch.
Use shims (H) to level the fountain
as necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7