You should have received the following parts in the package. Please ensure that all parts are accounted for.
LINCOLN FLOOR FOUNTAIN Care and Instruction Manual FPO
51017WDG ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1017WDG ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. To protect the finish, place all parts on a soft surface when unpacking. Choose a location: This freestanding water feature can be placed in the center of your space or against a wall. This water feature is designed for outdoor use. It can be used indoors, however splashing may occur. Also consider the location of your power source.
51017WDG ASSEMBLY INSTRUCTIONS Take out rubber hose. Attach pump (D) to the rubber hose. A RUBBER HOSE D Put pump (D) into fountain body (A).
51017WDG ASSEMBLY INSTRUCTIONS Cover the entry with pump access door (C). C Fill reservoir with distilled water a little below the max. fill line.
51017WDG ASSEMBLY INSTRUCTIONS Place splash guard (B) into reservoir. B FINAL STEPS Place decorative river stones (F) into fountain body (A). Plug pump (D) into outlet. Use shims (E) to level the fountain as necessary.
51017WDG ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Back cover Regulator Pump housing Filter/ Front cover Suction cup If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
51017WDG ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. • To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
51017WDG ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51017WDG ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51017WDG ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.
www.kenroyhome.
