Installation Guide

Attach pump (F) to the rubber hose.
Place column (A) into reservoir (B).
51024COPBRZ ASSEMBLY INSTRUCTIONS
A
Rubber hose
F B
7
Fill reservoir (B) with distilled
water. Water level should
stay above ll line when fountain
is running.
Connect the light connectors (G)
and (H) and screw the cap tightly.
Plug light transformer (F) and
pump (G) into outlets and turn
light on at switch.
Use shims (E) to level the fountain
as necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.