You should have received the following parts in the package. Please ensure that all parts are accounted for.
KYOTO FLOOR FOUNTAIN Care and Instruction Manual
51024COPBRZ ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1024COPBRZ ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. SUGGESTED TOOLS NOT SUPPLIED PHILLIPS SCREWDRIVER More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened.
51024COPBRZ ASSEMBLY INSTRUCTIONS Feed light cord (H), then pump cord (F) through the plastic tube. Turn over the reservoir (B). H F H Plastic tube B F B Feed light cord (H), then pump cord (F) through the hole. Secure upper base (C) to reservoir (B) with 2 x I and 2 x J.
51024COPBRZ ASSEMBLY INSTRUCTIONS Feed light cord (H), then pump cord (F) through the hole. Secure lower base (D) to upper base (C) with 2 x I and 2 x K. Hole D H F C D K I C Turn over the fountain assembly. Place bulbs (H) into bulb holders.
51024COPBRZ ASSEMBLY INSTRUCTIONS Attach pump (F) to the rubber hose. Place column (A) into reservoir (B). A Rubber hose F B FINAL STEPS 7 Fill reservoir (B) with distilled water. Water level should stay above fill line when fountain is running. Connect the light connectors (G) and (H) and screw the cap tightly. Plug light transformer (F) and pump (G) into outlets and turn light on at switch. Use shims (E) to level the fountain as necessary. Note: Light does not have to be on to operate pump.
51024COPBRZ ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Back cover Regulator Pump housing Filter/ Front cover Suction cup If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
51024COPBRZ ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump.
51024COPBRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51024COPBRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51024COPBRZ ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.
www.kenroyhome.
