Installation Guide

51010ZC ASSEMBLY INSTRUCTIONS51010ZC ASSEMBLY INSTRUCTIONS
FINAL STEPS
Fill the reservoir (D) with distilled
water. Water should remain above
the ll line on pump access door
while the fountain is running.
Connect the light connectors (H)
and (I) and screw the cap tightly.
Plug light transformer (H) and
pump (G) into outlets and turn
light on at switch.
Use shims (F) to level the fountain
as necessary.
Note: Light does not have to be on to operate pump.
7
Take out the pump (G) and attach to rubber hose,
replace the pump (G) and cover the entry with pump
access door (C).