You should have received the following parts in the package. Please ensure that all parts are accounted for.
IBIZA OUTDOOR Fountain Care and Instruction Manual
51010ZC Assembly Instructions Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. Customer support Team For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1010ZC Assembly Instructions Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. To protect the finish, place all parts on a soft surface when unpacking. More than one person may be required to complete the assembly of this product. When assembling ensure that all parts are firmly tightened. Choose a location: This freestanding water feature is attractive from all sides and can be used to highlight almost any area.
51010ZC Assembly Instructions Place reservoir (D) onto base (E) and rotate it to secure. Feed pump cord and light cord through plastic tube, make sure the cords exit out from notch on bottom of base (E). Place pump (G) and two spot lights (I) into reservoir (D).
51010ZC Assembly Instructions Place lower column (B) into reservoir (D) and twist it clockwise to secure. Feed rubber hose through plastic tube, place upper column (A) into lower column (B) and twist the upper column (A) clockwise to secure.
51010ZC Assembly Instructions Take out the pump (G) and attach to rubber hose, replace the pump (G) and cover the entry with pump access door (C). FINAL STEPS Fill the reservoir (D) with distilled water. Water should remain above the fill line on pump access door while the fountain is running. 7 Connect the light connectors (H) and (I) and screw the cap tightly. Plug light transformer (H) and pump (G) into outlets and turn light on at switch. Use shims (F) to level the fountain as necessary.
51010ZC Assembly Instructions PUMp safety & troubleshooting To clean the pump To keep water clean Unplug the pump from the electrical Periodically change water outlet. Use a small soft brush or place it to prevent algae buildup. under a water stream to remove debris. If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions. • Clean out any algae buildup. • Remove the front cover & impeller cover to access the impeller area.
51010ZC Assembly Instructions WATER FEATURE warnings & Troubleshooting • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
51010ZC Assembly Instructions Frequently Asked Questions What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51010ZC Assembly Instructions Frequently Asked Questions continued How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51010ZC Assembly Instructions Frequently Asked Questions continued How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4. If your pump comes with a sponge filter rinse this with clean water.
www.kenroyhome.
