Instructions / Assembly

13
 Fasten the L-shaped brackets (1) using 2 pieces of M6mm x 12mm screws (5) and 2 pieces of
M6mm nuts (4).
1
 With a pencil, mark the hole locations on the wall where the heater will be mounted according
to measurements below. The L-shaped brackets (1) can also be used as templates to mark the
hole locations.
2
1.1 "
1.1 "
11.8"-15.7”
M6mm x 12mm Screw
Qty: 2 pcs
L-Shaped Bracket Installation
M6mm Nut
Qty: 2 pcs