Full Product Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Slide Number 25
- Slide Number 26
- Slide Number 27
- Slide Number 28
- Slide Number 29
- Slide Number 30
- Slide Number 31
- Slide Number 32
- Slide Number 33
- Slide Number 34
- Slide Number 35
- Slide Number 36
- Slide Number 37
- Slide Number 38
- Slide Number 39
- Slide Number 40
- Slide Number 41
15
Mounting Bracket Installation
Use 4 pieces of PA5mm x 25mm screws (3) to attach the mounting brackets to the wall, making
sure they go into the plastic anchors, tighten them with the screwdriver.
Note: if the mounting surface is solid like wood, no need for plastic anchors.
5
With the help of a partner, fasten the heater to the L-shaped bracket using the pre-installed wing
nuts on the back of the heater and hand tighten the wing nuts.
6
Heater Installation
WALL
CEILING
PA5mm x 25mm Mounting Screw
Qty: 4 pcs