Installation guide

Installation Instructions
TOOLS YOU WILL NEED
HE)
#1 Phillips screwdriver
Pencil
Tin snips (for cutting
damper, if required) Scissors
(to cut template, if necessary)
P ¥ drill bits
Saw (saber, hole or keyhole)
O}
Fae,
Ge 6 |
Stud finder or
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Electric drill with %e6", 2" and %"
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Hammer (optional)
Safety goggles
—a—— =)
nog
level Duct and masking tape
MOUNTING SPACE
iif
Bottom Edge of
Cabinet Needs to
be 30” (76.2 cm)
i or More from the
Cooking Surface
30°
(76.2 cm)
min.
cksplash
66” (167.6 cm)
or More from
the Floor to the @
Top of the OO, ¢
Microwave
NOTES:
* The space between the cabinets must be
30" (76.2 cm)wide and free of obstructions.
* If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
* When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
¢ Asa guide to installation, see page 24 for Mounting
Template Information
Cabinet Cabinet ((
EN-5