Installation guide

Installation Instructions
A5.|] MOUNT THE MICROWAVE
OVEN (cont.)
Cabinet Front
Cabinet Bottom Shelf
wa Filler Block
Equivalent
AN a
Y Ee to Depth
~My, of Cabinet
a2 EAA Recess
-~<«— Self-Aligning Screw
Lb
atl
-
_
Microwave Oven Top
[4] Attach the microwave oven to the top cabinet.
5 | Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
[6 | Tighten center
screw completely.
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Install grease filters. See the Use and Care
packed with the microwave.
A6.| ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Back of
Blower
Plate
Damper
Microwave
es
a
oe For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
a
A7.| CONNECTING DUCTWORK
House Duct
@
©
PAE ES EE
\
1 | Extend the house duct down to connect to
the exhaust adaptor.
2 Seal exhaust duct joints using furnance duct tape
for high temperature applications.
EN-15