Installation guide

ENGLISH

ESPAÑOL

1. Carefully lift microwave oven and hang it on support

tabs (See Figure 26) at the bottom of the mounting

plate. Reaching through upper cabinet, thread

power supply cord through the power supply cord

hole in the bottom of the upper cabinet.

See Figure 30.

2. Rotate the microwave oven upward so the top of

oven is against the bottom of the upper cabinet or

cabinet frame.

3. Then insert a bolt down through each hole in the

upper cabinet bottom. See Figure 31.

Tighten the bolts until the gap between the upper

cabinet and microwave oven is closed.

4. If wall vented or room vented installation is used, go

to No. 7 on the next page.

STEP 6:

ATTACH THE OVEN TO THE WALL

You will need two people to lift this

microwave. Failure to use more

than one person could result in

personal injury.

WARNING

power cord

hole

Figure 30

Figure 31