Installation guide

PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
HSITSNa
Clear Tape
(for taping the templates to the wall)
RED
Stud Finder or Thin Nail
Ss
Saber Saw (for cutting vent holes for roof
or wall vending)
Phillips Screwdriver (for the screws)
Keyhole Saw (for the power cord hole)
Electric drill
a
—— et)
3/8" and 3/4" wood drill bits =
Pencil 1/2" and 3/16"
ny drill bits —_=,
Flat Blade Screwdriver (for the toggle bolts) Plumb Line
— HS
Measuring Tape (metal preferred)
G)
ae
Duct Tape
Q
Small Side Cutters or Tin Snips
Co
IO
Caulking gun
e If you have brick or masonry walls, you need special hardware and tools.
e The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.