Installation guide

PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape Stud finder or thin nail.
(for taping the templates to the wall)
TES
A S
Saber saw (for cutting vent holes for roof
or wall venting)
Key hole saw (for the power cord hole)
Phillips screwdriver (for the screws)
3/8" and 3/4" wood drill bits = 2
HSITMDNaA
— EE)
1/2" and 3/16" "=
Pencil drill bits —
=D
Flat blade screwdriver (for the bolts) Plumb line
a ES ae ~BEP
Measuring tape (metal preferred) Duct Tape
Small side cutters or tin snips Caulking gun
eee
Co
@ If you have brick or masonry walls, you need special hardware and tools.
®@ The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.