Installation guide

STEP 3:
PREPARE THE VENTING BLOWER
blower unit
exhaust ports
blower plate
mounting
screws
exhaust -o_:_
ports blowerunit
mountingscrew
Figure 15 Figure 16
ROOF-VENTED INSTALLATION:
1. Remove one blower unit mounting screw and two
blower plate screws. Remove the blower plate from
cabinet. See Figure 17.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit 90 ° so that the exhaust ports face
the top of the cabinet. See Figure 18.
4. Place blower unit back into microwave oven.
5. Use side cutters or tin snips to cut and remove
knockouts "A" from blower plate. Discard knockouts.
Be careful not to distort the plate. See Figure 19.
6. Reattach blower plate to microwave oven. Attach with
the one blower unit mounting screw and then the two
blower plate mounting screws.
See Figure 20.
blower unit
blower plate
blower plate
mounting screws
blower unit
mounting screw
Figure 17
unit
Figure 18
Knockouts "A"
blower plate
Figure 19
blower plate
mounting
screws
blower plate -o_
blower unit
mounting screw
Figure 20
mll m