Installation guide

STEP 3:
PREPARE THE VENTING BLOWER
exhaust
ports
Figure 16
blower unit
exhaust ports
blower plate
mounting
screws
blower unit
mounting screw
Figure 17
ROOF-VENTED INSTALLATION:
1. Remove one blower unit mounting screw and
two blower plate screws. Remove the blower
plate from cabinet. See Figure 18.
2. Carefully lift the blower unit out of the
microwave oven.
3. Rotate blower unit 90 ° so the exhaust ports face
the top of the cabinet. See Figure 19.
4. Place blower unit back into microwave oven.
5. Use side cutters or tin snips to cut and remove
knockouts "A" from blower plate. Discard
knockouts. Be careful not to distort the plate.
See Figure 20.
6. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the two blower plate mounting screws.
See Figure 21.
_ blower plate
mounting screws
blower plate blower unit
mounting screws
Figure 18
blower
unit
Figure 19
Knockouts "A"
blower plate
Figure 20
blower plate
mounting
screws
blower plate "%:_
blower unit
mounting screw
Figure 21
m12m