Manual

ToInstall:
1. Removetapefromthehub.
2. Placethesupportontheovencavitybottom.
3. Placetheturntableonthesupport.
Fittheraised,curvedlinesinthecenteroftheturntable
bottombetweenthe3spokesofthehub.Therollersonthe
supportshouldfitinsidetheturntablebottomridge.
ToTurnTurntableOff:
Theturntablecanbeturnedoff(exceptduringanautofunction).
Thisishelpfulwhencookingwithplatesthatarelargerthanthe
turntable,orwhencookingwithtwo101Ain.(26cm)platesthat
aresidebyside.
ToTurnOff:TouchTURNTABLEON/OFE
"TURNTABLEOFF"willappearinthedisplay.Theturntablewill
turnbackonautomaticallywhencookingisoverorSTOP/CLEAR
istouched.
Thecookingrackisidealfortwo-levelcooking.Itprovidesextra
cavityspaceforcookingtwoormorecontainersatthesame
time.Inserttheracksecurelyintotheracksupportsontheside
wallsoftheoven.Toreorderrack,call1-800-4-MY-HOME®.See
"Re31acementParts"sectionforpartnumber.
• Rackwillbecomehot.Alwaysuseovenmittsorpotholders
whenhandling.
• Donotallowtheracktotouchtheinsidecavitywalls,ceiling
orfloor.
• Donotusemetalcookware,utensils,orabrowningdishwith
therack.
• Donotletfoodcontaineronracktouchthetoporsidesofthe
oven.
• RemoverackbeforeusingthePopcornfunction.
• Therackisdesignedspecificallyforthisoven.Donotuseitin
anyotheroven.
• Donotcookfooddirectlyontherack.Alwaysusea
microwave-safecontainer.
• Usetherackonlywhencookingontwolevels.Donotstoreit
intheoven.Damagetotheovencouldresultifsomeone
accidentallyturnsontheoven.
MICROWAVE OVEN
CONTROL
G ® ®
® ® ®
G ® ®
®
A _
High/Low/Of( On/Night/Off
When power is first supplied to the microwave oven, a ":" will
blink on the display. Touch STOP/CLEAR to stop the blinking.
If the ":" blinks on the display at any other time, a power failure
has occurred. Touch STOP/CLEAR and reset the clock if needed.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.
If "RETRY" blinks on the display for one second, an invalid value
has been entered. Retry your entry.
The START pad begins any function. If not touched after touching
a pad, "START?" will appear in the display.
If cooking is interrupted, touching START will resume the preset
cycle.