Installation guide

TOOLS YOU WILL NEED
#1 and #2 Phillips Pencil Ruler or tape measure and Carpenter square (optional)
screwdriver straight edge
pf Ss
| RYE ED OO —
Tin snips (for cutting Scissors (to cut template, if Electric drill with 3/16”, ¥2” Gloves
damper, if required) necessary) and 5/s” drill bits
a
Safety goggles Saw (saber, hole or keyhole) Stud finder or Hammer Level
(optional)
Duct and masking tape Filler blocks or scrap wood pieces, if needed for top cabinet spacing
(used on recessed bottom cabinet installations only)
MOUNTING SPACE
« The space between the cabinets must be 30”
wide and free of obstructions. Bottom surface of
. This microwave oven is for installation over cabinet needs to be
ranges
up
to
30”
wide.
30”.
or
more
from
. . the cooking surface.
. If you are going to vent your microwave oven to
the outside, see Hood Exhaust Section for exhaust
duct preparation.
« When installing the microwave oven beneath
smooth flat cabinets be careful to follow the
instructions on the top cabinet template for
power cord clearance.
8505_XAA_03807A-EN+MES.indb 7 2010-07-08 6:52:57