Manual

EN-11
Operation
SETTING THE CLOCK
Whentheovenisrstpluggedin,thedisplaywillshow":0"andatonewillsound.IftheAC
powerevergoesoff,thedisplayshow“:0”whenthepowercomesbackon.
1. Press the
CLOCK pad
. The ENTER, TIME indicators blink and "
12H
" is displayed.
• This is a 12 hour clock system.
2. Press the
CLOCK pad
once more. "
24H
" is displayed.
• This is a 24 hour clock system.
• This oven has multiple clock systems. If you want 12 hour clock system, omit this step.
3. Enter the correct time of day by pressing the number pads in sequence.
• If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.
4. Press the
CLOCK pad
. The display stops blinking, and the colon starts blinking.
NOTE:
(1) If you attempt to enter an incorrect time, the time will not be set and an error signal
tone will sound. Press the
CLOCK pad
and re-enter the time.
(2) If you want to set power save mode, press and hold
CLOCK pad
for 3 seconds.
For detailed information on this feature, see Operating Basics section, page EN-23.